Home  /  Products  /  Bicycle & E-bike Saddles  /  AB-SA027
3D Printed Carbon Fiber Bike Saddle, Honeycomb Breathable Racing Saddle for Road Cycling
AB-SA027 top — hexagonal lattice and the centre channelSide profile — lattice build, nose taper and rail lineUnderside: carbon weave, four cut-outs and continuous rail loop
AB-SA027 · Bicycle & E-bike Saddles

3D Printed Carbon Fiber Bike Saddle, Honeycomb Breathable Racing Saddle for Road Cycling

3D-printed latticeRoad racing260 × 140 mm

260 × 140 mm, printed in one piece. The top is a hexagonal lattice rather than foam under a cover — open cells that flex under load and let air straight through, printed tighter at the nose and wider at the sit bones so the support and the give are set by geometry instead of by how much padding was added. Underneath, the shell is carbon with a visible weave under clear gloss, cut away along the centre in four openings divided by three bridges, and the rails run as one continuous loop from two bonded blocks at the rear to a single yoke at the nose. There is no cover to tear, nothing to soak up water, and no foam to pack down over a season.

ModelAB-SA027
Key spec260 × 140 mm
MaterialCarbon fibre
MOQOn request
Lead timeOn request
SampleConfirm before order
No online ordering. This page is a specification sheet, not a shop — pricing, MOQ confirmation and shipping are handled by WhatsApp or email so we can quote against your actual quantity and destination.
Overview

Why buyers choose this part

Everything below is what we build to by default. Tolerances, finish and packaging can all be changed for an OEM project.

  • 3D-printed hexagonal lattice top — the surface is the structure, with no foam and no cover to tear
  • Cell size is graded across the saddle: tighter at the nose, wider at the sit bones, so flex follows the load
  • Cells open right through to the shell — air passes the whole top, not just a vent channel
  • Carbon shell with a visible weave under clear gloss; four centre cut-outs divided by three bridges
  • Rails run as one continuous loop — two bonded blocks at the rear, one yoke at the nose
  • KEVLAR badging at the rail bridge (see the detail photo) — the highest-stress joint is Kevlar-toughened
  • 260 × 140 mm racing platform, direct mount with no springs
  • Nothing to absorb water and no stitched seams to fray — hose it down and ride
  • Black as standard; custom colour and logo on request

Full specification

Overall size260 × 140 mm (L × W)
Top3D-printed hexagonal lattice, open cells, no cover
LatticeCell size graded from nose to sit bones
ShellCarbon fibre, visible weave, clear gloss
ReliefCentre channel in four openings divided by three bridges
RailsContinuous loop, carbon with KEVLAR bridge marking
FixingTwo bonded blocks at the rear, one nose yoke
MountingStandard seatpost clamp — direct mount, no springs
WeightOn request — confirmed per batch
ColoursBlack / Custom
FitRoad, criterium, gravel and XC racing
Base and materials
Ordering information

Packing, terms and documents

Standard terms are below. Volume projects and private-label programmes are quoted individually.

PackingOn request — quoted against quantity and destination
BrandingEmbossed logo · custom cover colour · retail box
SampleCharge refunded on first order
ShippingFOB Ningbo / Shanghai, CIF or door delivery
Payment30 % deposit, 70 % against B/L
DocumentsTest report, mill certificate, AQL report
Related models

Others in the same family

Mixed models can be consolidated into one container and one document set.

Want pricing for AB-SA027?

Send us your quantity and destination port. We reply within one working day with unit price, MOQ confirmation, packing details and a production date.

Reply in < 12 hQuotations during working hours
OEM / ODMYour brand, colours and packaging
SampleAvailable on request
Bulk ordersConsolidated shipping worldwide
Chat on WhatsApp